How To Crack Master Lock Combination Padlock

If you do not know the combination to a Master Lock combinationlock, you have a few options. If the lock isn t locked onto anything, look to see whether it has a serial number stamped on the back. If it does, you can follow a procedure to mail a photocopy to Master Lock for the combination. If it does not, Master Lock cannot provide you with a serial number so read on.

If your lock is attached to something, you can break the lock, call a locksmith, use a shim, or figure out the combination. Of these options, only the last two will leave you with a usable lock without emptying your wallet. Unfortunately, there are 64,000 possible combinations on a standard 40 digit Master Lock. With this method, however, you can quickly narrow that down to 80 combinations, a workable number to try if you ve got the time and the inclination to give it a shot.

Note: This works with some Master Lock combination locks but may not work with all of them, especially not those that have no serial numbers. Some may not turn at all when the shackle is raised. It is rumored that Master Lock changed the combination algorithm on some of the locks, in particular those with serial numbers starting with the number 800. Some people, however, have reportedly had success cracking these with this method, too, so it may be worth a try. Check the discussion page for this article to check which serial numbers others succeed with.

Edit Steps

Turn the lock s dial clockwise to zero. It is a good idea to turn it at least three rotations first, just to make sure it is clear.

Pull down on the shackle. Turn the dial slowly as you apply tension. If you can t turn the dial at all, release the shackle and turn the dial clockwise just a number or two and then try it again.

Find the first sticking point.As you turn the dial clockwise with tension on the shackle, you will come to a point where you can t turn the dial anymore. Make note of where it stops. Sometimes it will stick right on the numbers, but sometimes it will be between the numbers. If so, record the number to the half e.g. 22.5, 7.5, etc..

While continuing to apply tension to the shackle, turn the dial as far left counter-clockwise as you can. Make note of where it stops. Now you have a sticking range. Note: Some 800XXX and 908xxx locks have a two number range e.g. 28-30, this sticking point is the last digit of your lock.

Determine the sticking point by finding the number that s in the midpoint of the sticking range. A range of 4 and 5 would have a sticking point of 4.5. A range of 22.5 and 23.5 would have a sticking point of 23.

Release shackle tension and turn the dial slightly past the sticking point. Turn the dial clockwise about one number higher from the sticking point in order to allow you to escape that sticking point.

Reapply tension to the shackle and continue turning the dial clockwise to find all the sticking points. You should find eleven more sticking points, for a total of twelve sticking points in one complete turn of the dial. Write them down.

Find the third number of the combination.Look at your list of sticking points and eliminate all those which are not whole numbers i.e. cross off any number that ends in. 5. You should eliminate 7 of the 12 numbers with this step.

Of the remaining sticking points, choose the one with the unique digit in the ones position. Four of the remaining five numbers will share the same number in the ones place, so for example, if the numbers left on the list are 4, 14, 24, 27, and 34, the number 27 is the only one which does not have a four in the ones place. This is the third number of the combination.

If you only have four numbers remaining and they all share the same digit in the ones position, check the note above in step 3 about a two number rangethe third number of your combination will be the one that has a two number range e.g. if you have 0,30,20,10 left, but 20 has a range of 19-21, that would mean that your third combination number is 20.

Find the magic number. Divide the third number of the combination 27 in this case by four and write down the remainder. In this case 27/4 6 remainder 3. Remember we are only concerned with the remainder, which will always be 0, 1, 2, or 3. Write down the magic number 3 in this example.

Find the possible first numbers of the combination. Add 4 to the magic number 3. Write down the result 7. Now add 4 to that and continue adding 4 to each resulting sum until you have gone completely around the dial once. Write down each of these numbers. Thus, for the example above the numbers would be 3, 7, 11, 15, 19, 23, 27, 31, 35, and 39. One of these numbers is the first number of the combination. NOTE: For some 800XXX locks this will be the second number of the combination. The next set of numbers will be used as the first

Find the possible second numbers of the combination. If your magic number is 0 or 1 then add 2 to it, otherwise subtract 2. Since our example magic number is 3, we subtract 2 and get 1. Write down the answer and add 4 to it. Now add 4 to each resulting sum until you have gone completely around the dial once. Thus, in the example, the numbers would be 1, 5, 9, 13, 17, 21, 25, 29, 33, and 37. One of these numbers is the second number in the combination.

Cross out the numbers the possible 2ND numbers Plus or Minus 2 25 29 from the third number of the combination 27.

Figure out the correct combination by trial and error. You now know all the possible first numbers 3, 7, 11, 15, 19, 23, 27, 31, 35, 39, all the possible second numbers 1, 5, 9, 13, 17, 21, 33, 37, and the third number 27. You ve just narrowed down 64,000 combinations to only 80. Now try each combination until you find the correct one. If you re lucky, you may need to try only a few but then again, you may need to try all 80. Remember this does not work on all locks. If your lock has a serial number on it, you can have Master Lock send you the combination.

Edit Tips

Only consider proceeding with this method if you enjoy a challenge. Otherwise, cutting off the lock and buying a new one makes more sense.

If your lock has a key way on the back, you can also drill a small hole next to it so that you can view the tumblers. After you align the tumblers, and determine the unlock code, you can seal the hole with a two-part epoxy.

Sometimes the sticking points for finding the 3rd number are not exactly on top of a number or between two numbers. In this case:

1. turn clockwise right the first of the 12 sticking points from 0

2. continue to turn clockwise to the opposite side of the dial

3. turn counterclockwise left back to the first sticking point from 0

4. pull up on the lock and turn the dial left and right in the small sticking area and write down the exact range. e.g. 2.75-3.5

5. repeat this 4 more times for the numbers 10 more from each other. e.g. 3, 13, 23, 33

6. now do steps 1-5 for the second sticking point past zero

7. do the steps again for the third point past zero.

Each set of numbers will all have the same range. For example, one group may be. 0 to. 0, another. 25 to. 75 and the last. 5 to. 25 on either side of the sticking points.

The third number of the combination is the one that doesn t fit within it s group.On my lock, it was also the one that had the most play in the range 5.25-6.75, 15.5-16.25, 25.5-26.25, 35.5-36.25. So my third number was the 6. If you notice, those 4 ranges are all for numbers with 6 in the ones place, had I followed the directions above, I may have ended up trying for a different number. Steps 1-4 aren t required but it seemed to give me some better results. Some numbers seemed to slide one way or the other by. 25 if I didn t do steps 1-4 for every sticking point.

There is an app called Lock Hero 0.99 for Android devices that uses this process. It s pretty much the same thing, but saves the user from having to deal with the numbers.

Edit Warnings

Do not use this technique to crack someone else s lock without permission of the owner. If you do that, you are breaking the law and could be prosecuted accordingly.

When finding the sticking numbers, be very precise. Otherwise you won t get the correct numbers.

The sticking method does not work on Master Lock Sphero Locks.

Edit Related wikiHows

Edit Sources and Citations

Master Lock Lost combination form and procedures